RC26R Mobile Rail Cutter
The Mobile Rail Cutter, RC26R, has been developed for efficient, controlled demolition of rail and the scrap preparation of railway lines.
Carrier: for carriers from 35,000 to 75,000 lbs. To achieve optimal work efficiency, the Mobile Rail Cutter should be mounted on the dipper stick of an excavator.
- Rails can be cut into any desired length, such as blast furnace sizes.
- Highly stress-resistant rotation system with a 180° swivel range.
- Quickly and easily reaches every working location required by the job.
| RC26R Mobile Rail Cutter | |
|---|---|
| Approx. weight excluding mounting bracket | 2.600 kg / 5,720 lbs |
| Length | 2.550 mm / 100.4 in |
| Jaw depth | 205 mm / 8.07 in |
| Cutter length | 182 mm / 7.17 in |
| Jaw opening | 205 mm / 8.07 in |
| Hydraulic cylinder recommended oil flow* | 250-350 liters/min / 66.7-93.3 gpm |
| Hydraulic cylinder max. working pressure | 350 bar / 4,550 psi |
| Rotation recommended oil flow | 18-25 liters/min / 4.8-6.7 gpm |
| Rotation max. working pressure | 200 bar / 2,840 psi |
| Rotation swivel | 180° |
| Approx. excavator size (rail cutter mounted on dipper stick) |
16-26 t / 35,200-57,200 lbs |
| *working time in seconds: | |||
|---|---|---|---|
| Oil flow | Close |
Open | Total |
250 liters/min / 66.7 gpm |
4.1 | 2.1 | 6.2 |
300 liters/min / 80.0 gpm |
3.5 | 1.8 | 5.3 |
350 liters/min / 93.3 gpm |
3.0 | 1.5 | 4.5 |